TRB145

Lightweight and powerful RS485 to 4G LTE Cat1 IoT gateway. High performance paired with Linux based firmware enables quick time-to-market in the most demanding applications. Learn more on wiki page

rs485

RS485 - industrial differential serial communication

lte-cat1

LTE Cat 1 for M2M/IoT communications

small

Compact size, easy integration

9-30v

Wide range of power supply voltages

rms

Teltonika Remote Management System compatible

rutos

RutOS – easy to use, secure and feature rich Operating System

Description icon Description
Features icon Features
Downloads icon Downloads
Ordering icon Ordering

Description

Industrial LTE Cat 1 Gateway Board TRB145 is equipped with RS485 Interface, Digital Inputs/Outputs and micro-USB port. TRB145 compact design makes this Gateway perfect for an application where a sole gadget must be remotely controlled over RS485 interface. TRB145 is engineered to be used in Industrial applications therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support.

Features

MOBILE
Mobile module4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
BridgeDirect connection (bridge) between mobile ISP and device on LAN
StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
SMS/CallSMS status, SMS configuration, Call utilities
NETWORK
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, SSH, DHCP, SNMP, MQTT
Connection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget
RoutingStatic routing
FirewallPort forwards, traffic rules, custom rules
DHCPStatic and dynamic IP allocation
DDNSSupported >25 service providers, others can be configured manually
SECURITY
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsecIKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server services can run simultaneously
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
FOTAFirmware update from sever, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration
MQTTMQTT Broker, MQTT publisher
JSON-RPCManagement API over HTTP/HTTPS
ModbusModbus TCP status/control
RMSTeltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPUARM Cortex-A7 1.2 GHz CPU
RAM128 MB (50 MB available for userspace)
FLASH memory512 MB (70 MB available for userspace)
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices
Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating systemRutOS (OpenLinux based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided
INPUT/OUTPUT
Configurable I/O2 x Digital Inputs/Outputs
EventsSMS status
POWER
Connector4 pin industrial DC power socket
Input voltage range9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max
Power consumption< 5 W
PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM)
RS485RS485 interface, Full Duplex (4 wires) and Half Duplex (2 wires), baud rate 300-115200
I/Os2 Inputs/Outputs pin on 4 pin power connector
USBVirtual network interface via USB
Status LEDs3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED
SIM1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power4 pin power connector with 2 x configurable Digital Inputs/Outputs
Anntenas1 x SMA for LTE
ResetRestore factory settings button
PHYSICAL SPECIFICATIONS
Casing materialAluminum housing
Dimensions60 mm x 70 mm x 18 mm (H x W x D)
Weight125 g
Mounting optionsBottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options
OPERATING ENVIRONMENT
Operating temperature-40 °C to 75 °C
Operating humidity10 % to 90 % non-condensing
Ingress Protection RatingIP30
REGULATORY & TYPE APPROVALS
RegulatoryCE/RED, EAC, RoHS, WEEE
EMI
StandardsDraft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0
ESDEN 61000-4-2:2009
RSEN 61000-4-3:2006 + A1:2008 + A2:2010
EFTEN 61000-4-4:2012
Surge protectionEN 61000-4-5:2014
CSEN 61000-4-6:2014
DIPEN 61000-4-11:2004
RF
StandardsEN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2
SAFETY
StandardsIEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017
EN 50385:2017
EN 62232:2017

Downloads

Ordering

Where to buy

Filter

      Use cases

      Smart Grid & Substation communication

      Smart Grid & Substation communication

      Remote monitoring of oil & gas pipelines

      Remote monitoring of oil & gas pipelines

      Video

      Videos describing the product and it's features.

      Related solutions

      List of solutions compatible with device