rut230

RUT230

INDUSTRIAL CELLULAR ROUTER
This product will be discontinued by 2021.12.15

CONNECTIVITY

Worldwide 3G network coverage

WAN FAILOVER

Automatic switching to available Backup connection

WIFI

Wireless Access Point with Hotspot functionality

COMPACTNESS

Small size – easy integration

I/O

Digital Input/Output for remote monitoring and control

RMS

Compatible with Teltonika Remote Management System

Meet the RUT230

// RUT230 is a compact, cost-effective, and secure industrial 3G Wi-Fi router for professional M2M & IoT applications, where no high data throughput is required.

// It delivers high performance for industrial cellular communication in harsh and hazardous environments.

// Equipped with two Ethernet ports, an external SIM holder, digital Input/Output, and signal strength status LEDs, it is easily deployed and managed.

// This router is compatible with the Teltonika Networks Remote Management System (RMS) and offers safety features, like Failover, Firewall, VPN, IPsec, and FOTA support.

Watch video RUT230 Wiki

3D Model

3D poster
click to Load 3D Model
Features icon fitur
Downloads icon Unduhan
Ordering icon Memerintah
Support icon Dukung
MOBILE
Mobile module3G – Up to 14.4 Mbps, 2G – Up to 236.8 kbps
StatusSignal strength (RSSI), EC/IO, RSCP, Bytes sent/received
BridgeDirect connection (bridge) between mobile ISP and device on LAN
PassthroughRouter assigns its mobile WAN IP address to another device on LAN
APNAuto APN
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White listOperator black/white list
Multiple PDN (optional)Possibility to use different PDNs for multiple network access and services
WIRELESS
Wireless modeIEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFiWPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
WiFi securityWPA2-Enterprise - PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation
SSIDSSID stealth mode and access control based on MAC address
WiFi usersUp to 50 simultaneous connections
Wireless HotspotCaptive portal (Hotspot), internal/external Radius server , built in customizable landing page
ETHERNET
WAN1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
NETWORK
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL)
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forward, traffic rules, custom rules
DHCPStatic and dynamic IP allocation, DHCP Relayd
QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNSSupported >25 service providers, others can be configured manually
Network backupVRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load balancingBalance your internet traffic over multiple WAN connections
NetSnapper (optional)Mobile connection management, data compression VPN client (not available in standard FW)
SSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
WiFi securityWPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes, Client separation
VLANTag based VLAN separation
Mobile quota controlSet up custom data limits for the SIM card
WEB filterBlacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsecIKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server services can run simultaneously
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code
SSTPSSTP client instance support
ZeroTierZeroTier VPN
MODBUS
MODBUS TCP SLAVE
ID range1-255
Allow Remote AccessAllow access through WAN
Custom registersModbus TCP custom register block requests, which read/write to a file inside the router, and can be used to extend Modbus TCP Slave functionality
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped)
MODBUS DATA TO SERVER
ProtocolHTTP(S), MQTT, Azure MQTT
MQTT GATEWAY
MQTT gatewayAllows sending commands and receiving data from Modbus Master through MQTT broker
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTAFirmware update from sever, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
CallReboot, Status, WiFi on/off, Mobile data on/off, Output on/off
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
JSON-RPCManagement API over HTTP/HTTPS
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS)
IoT PLATFORMS
Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorxAllows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
CumulocityAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT HubCan send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
CPUAtheros Hornet, MIPS 24Kc, 400 MHz
RAM64 MB, DDR2
FLASH memory16 MB SPI Flash
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices
Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with built environment provided
INPUT/OUTPUT
Input1 x Digital non-isolated input (on 4 pin power connector)
Output1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector)
EventsSMS, EMAIL, RMS
POWER
Connector4 pin industrial DC power socket
Input voltage range9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max
PoE (passive)Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at
Power consumption< 5 W
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet2 x RJ45 ports, 10/100 Mbps
I/O’s1 Digital Input, 1 Digital Output on 4 pin power connector
Status LEDs3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
Power4 pin DC connector
Antennas1 x SMA for 3G, 1 x RP-SMA for WiFi antenna connectors
ResetReset/restore to default button
PHYSICAL SPECIFICATION
Casing materialAluminum housing, plastic panels
Dimensions74 x 83 x 25 mm (L x W x H)
Weight125 g
Mounting optionsBottom and sideways DIN rail mounting slots
OPERATING ENVIRONMENT
Operating temperature-40 °C to 75 °C
Operating humidity10% to 90% non-condensing
Ingress Protection RatingIP30
MTBF320000 h
REGULATORY & TYPE APPROVALS
RegulatoryCE/RED, EAC, CCC, RoHS, WEEE, Morocco ANRT, REACH, Thailand NBTC, Ukraine UCRF
EMI IMMUNITY
StandardsDraft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0
ESDEN61000-4-2:2009
RSEN 61000-4-3:2006 + A1:2008 + A2:2010
EFTEN 61000-4-4:2012
Surge protectionEN 61000-4-5:2006
CSEN 61000-4-6:2009
DIPEN 61000-4-11:2004
RF
StandardsEN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1
SAFETY
StandardsIEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
EN 50665:2017, EN 62311:2008
All features Less features
RMS app
RMS
Remote
Management
System
compatible with RUT230
Management
Alerts
Configuration
Access
FOTA
RUT230
Quick start guide

Produk-produk terkait

3D model