rut900

RUT900

ROTEADOR CELULAR INDUSTRIAL
This product will be discontinued by 2021.12.15

CONECTIVIDADE

Cobertura de rede em todo o mundo 3G

WAN FAILOVER

Para confiabilidade de conexão adicional

WI-FI

Ponto de acesso sem fio com funcionalidade Hotspot

DUAL SIM

Com auto failover, WAN backup e outros cenários de comutação

ETHERNET

4x portas Ethernet com funcionalidade VLAN

RMS

Compatível com Sistema de Gerenciamento remoto Teltonika

Conheça o RUT900

// RUT900 é um roteador industrial profissional 3G Wi-Fi para aplicações da Internet das coisas que proporciona comunicação celular de alta performance.

// É compatível com RMS - Sistema de gerenciamento remoto da Teltonika Networks para fornecer o verdadeiro valor da M2M e aplicações de rede na Internet das coisas.

// RUT900 é alimentado por RutOS - um sistema operacional unificado para todos os roteadores Teltonika Networks, destinado às aplicações de redes móveis mais exigentes, sendo confiável, seguro e fácil de usar.

// RUT900 garante conectividade estável com failover 3G Dual-SIM e fallback 2G.

RUT900 Conhecimento

3D Model

3D poster
clique para carregar modelo 3D
Features icon Recursos
Downloads icon Transferências
Ordering icon Encomenda
Support icon Apoio, suporte
MOBILE
Mobile module3G – Up to 14.4 Mbps, 2G – Up to 236.8 kbps
SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
StatusSignal strength (RSSI), EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White listOperator black/white list
Band managementBand lock, Used band status display
APNAuto APN
BridgeDirect connection (bridge) between mobile ISP and device on LAN
PassthroughRouter assigns its mobile WAN IP address to another device on LAN
WIRELESS
Wireless modeIEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi securityWPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSIDSSID stealth mode and access control based on MAC address
WiFi usersUp to 100 simultaneous connections
Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
WAN1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
NETWORK
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forward, traffic rules, custom rules
DHCPStatic and dynamic IP allocation, DHCP relay, Relayd
QoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNSSupported >25 service providers, others can be configured manually
Network backupVRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load balancingBalance your internet traffic over multiple WAN connections
SSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANPort and tag based VLAN separation
Mobile quota controlSet up custom data limits for both SIM cards
WEB filterBlacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsecIKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server services can run simultaneously
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code
SSTPSSTP client instance support
ZeroTierZeroTier VPN
WireGuardWireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
ID filteringRespond to one ID in range [1;255] or any
Allow Remote AccessAllow access through WAN
Custom registersModbus TCP custom register block requests, which read/write to a file inside the router, and can be used to extend Modbus TCP Slave functionality
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS DATA TO SERVER
ProtocolHTTP(S), MQTT, Azure MQTT
MQTT GATEWAY
MQTT gatewayAllows sending commands and receiving data from Modbus Master through MQTT broker
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
CallReboot, Status, WiFi on/off, Mobile data on/off, Output on/off
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
JSON-RPCManagement API over HTTP/HTTPS
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPUAtheros Wasp, MIPS 74Kc, 550 MHz
RAM128 MB, DDR2
FLASH storage16 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices
Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided
INPUT/OUTPUT
Input1 x Digital input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Output1 x Digital open collector output, max output 30 V, 300 mA
EventsSMS, EMAIL, RMS
POWER
Connector4 pin industrial DC power socket
Input voltage range9 – 30 VDC, reverse polarity protection; surge protection >31VDC 10us max
PoE (passive)Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
Power consumption< 2 W idle, < 7 W Max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet4 x RJ45 ports, 10/100 Mbps
I/O’s1 x Digital Input, 1 x Digital Output on 4 pin power connector (available from HW revision 1600)
Status LEDs1 x bi-color Connection type status LED, 5 x Connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
SIM2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
Power1 x 4 pin DC connector
Antennas2 x SMA for 3G, 2 x RP-SMA for WiFi antenna connectors
ResetReboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
Casing materialAluminium housing, plastic panels
Dimensions (W x H x D)110 x 50 x 100 mm
Weight280 g
Mounting optionsDIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
Operating temperature-40 °C to 75 °C
Operating humidity10% to 90% non-condensing
Ingress Protection RatingIP30
REGULATORY & TYPE APPROVALS
RegulatoryCE/RED, EAC, RoHS, WEEE
EMI IMMUNITY
StandardsDraft EN 303 446-1 V1.1.0
ESDEN61000-4-2:2009
RSEN 61000-4-3:2006 + A1:2008 + A2:2010
EFTEN 61000-4-4:2004
Surge protectionEN 61000-4-5:2006
CSEN 61000-4-6:2009
DIPEN 61000-4-11:2004
RF
StandardsEN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1
SAFETY
StandardsIEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
EN 62311:2008
Todos os recursos Menos recursos
RMS app
RMS
Remoto
Gerenciamento
Sistema
compatível com RUT900
Gerenciamento
Alertas
Configuração
Acesso
FOTA

Produtos relacionados

3D model