rutx10

RUTX10

ROTEADOR ETHERNET PROFESIONAL

GIGABIT ETH

4 x portas Gigabit Ethernet VLAN com até 128 port/tag-based soportadas

I/O & USB

Entrada/Saída Digital para monitoramento remoto, controle e interface USB 2.0

WIFI & BT

Wave-2 802.11ac Dual Band WiFi e Bluetooth LE

PROTOCOLOS

Vários protocolos suportados, incluindo MQTT, Modbus TCP, BGP, GRE

SEGURANÇA

Numerosos serviços de firewall e VPN incluindo OpenVPN, IPsec, PPTP, L2TP & DMVPN

RMS

Compatível com Sistema de Gerenciamento remoto Teltonika

Conheça o RUTX10

// Criamos RUTX10 roteador corporativo especialmente para pequenas aplicações de escritório de médio porte.

// É fornecido com banda dupla Wi-Fi 802.11ac 5, que é muito apropriado para a transmissão de dados elevada e desempenho robusto sem fios.

// Ele tem todas as últimas características de segurança e permite monitoramento remoto e controle.

// RUTX10 vem com RutOS, sistema operacional altamente funcional e personalizável baseado em OpenWRT.

// Sinergia entre o hardware eo software torna este dispositivo um artista incrível em soluções empresariais.

Assistir vídeo RUTX10 Conhecimento

3D Model

3D poster
clique para carregar modelo 3D
Features icon Recursos
Downloads icon Transferências
Ordering icon Encomenda
Support icon Apoio, suporte
ETHERNET
WAN1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
WIRELESS
Wireless mode802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi securityWPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSIDESSID stealth mode
Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, built in customizable landing page
BLUETOOTH
Bluetooth 4.0Bluetooth low energy (LE) for short range communication
NETWORK
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNA
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoringPing Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forwards, traffic rules, custom rules
DHCPStatic and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNSSupported >25 service providers, others can be configured manually
Network backupVRRP, Wired and WiFi WAN options, each of which can be used as an automatic Failover
SSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
AutheticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANPort and tag based VLAN separation
WEB filterBlacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsecIKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3 support
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPNMethod of building scalable IPsec VPNs
SSTPSSTP client instance support
ZeroTierZeroTier VPN client support
WireGuardWireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
ID filteringRespond to one ID in range [1;255] or any
Allow remote accessAllow access through WAN
Custom registersModbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GATEWAY
GatewayAllows sending commands and receiving data from Modbus Master trough MQTT broker
DATA TO SERVER
ProtocolsHTTP(S), MQTT, Azure MQTT, Kinesis
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
CallReboot, Status, Mobile data on/off, Output on/off
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
JSON-RPCManagement API over HTTP/HTTPS
ModbusModbus TCP status/control
RMSTeltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPUQuad-core ARM Cortex A7, 717 MHz
RAM256 MB, DDR3
FLASH storage256 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices at once
Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided
USB
Data rateUSB 2.0
ApplicationsSamba share, USB-to-serial
External devicesPossibility to connect external HDD, flash drive, additional modem, printer
Storage formatsFAT, FAT32, NTFS
INPUT/OUTPUT
Input1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
EventsEmail, RMS
POWER
Connector4 pin industrial DC power socket
Input voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protection
PoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
Power consumption9 W Max
PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)
Ethernet4 x RJ45 ports, 10/100/1000 Mbps
I/Os1 x Digital Input, 1 x Digital Output on 4 pin power connector
Status LEDs8 x LAN status LEDs, 1 x Power LED, 2.4G and 5G WiFi LEDs
Power1 x 4 pin DC connector
Antennas2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth
USB1 x USB A port for external devices
Reset1 x Reboot/User default reset/Factory reset button
Other1 x Grounding screw
PHYSICAL SPECIFICATION
Casing materialAluminium housing with DIN rail mounting option
Dimensions (W x H x D)115 x 32.2 x 95.2 mm
Weight355 g
Mounting optionsDIN rail, flat surface placement
OPERATING ENVIRONMENT
Operating temperature-40 C to 75 C
Operating humidity10 % to 90 % non-condensing
Ingress Protection RatingIP30
Todos os recursos Menos recursos
RMS app
RMS
Remoto
Gerenciamento
Sistema
compatível com RUTX10
Gerenciamento
Alertas
Configuração
Acesso
FOTA
RUTX10
Guia de inicio rápido

Produtos relacionados

3D model