 | (power over Ethernet) compliant with IEEE 802.3af – 2003 |
 | +5 V output, Magnetic card reader support |
 | 1-Wire® interface to monitor temperature data and RFID/iButton tags |
 | 3 x Ethernet LAN ports, 10/100 Mbps |
 | 4x Ethernet ports with VLAN functionality |
 | 5 configurable buttons |
 | 802.11ac Dual Band Wave2 WiFi |
 | Additional micro SD card slot for records storing |
 | Advanced solution which reads more than 100 parameters |
 | Alarm button immediately sends notification in case of emergency |
 | All antennas and Teltonika router integrated in one enclosure |
 | All devices come pre-registered |
 | Allows device to work without external power source |
 | Allows reading CAN bus data from vehicle ECU |
 | Allows reading CAN bus data from vehicle ECU via Bluetooth |
 | Antenna perfectly matched with the router |
 | Automatic failover switch between multiple internet sources for highest reliability cases |
 | Automatic switch to available backup connection |
 | Bluetooth for external devices and Low Energy sensors |
 | Built-in accelerometer for accurate crash trace data |
 | CAN data reading and control of electric vehicles |
 | CAN data reading from agriculture and special transport* |
 | CAN data reading from agriculture transport |
 | CAN data reading from buses and coaches |
 | CAN data reading from light vehicles |
 | CAN data reading from light vehicles, buses, coaches and trucks |
 | CAN data reading from special transport |
 | CAN data reading from trucks |
 | CAN data reading from vehicles and specialized transport |
 | Classifies the degree of protection against solid objects and water |
 | Classifies the degree of protection against solid objects and water |
 | Classifies the degree of protection against solid objects and water |
 | Compact size, easy integration |
 | Configurable DIN/AIN for flexible remote monitoring and control |
 | Connect your end device directly to the internet by using bridge mode |
 | Crash detection functionality working according accelerometer data |
 | Device access without public IP address |
 | Device can be powered over Ethernet port but it is not compliant with IEEE 802.3af-2003 standard |
 | Device can display life video footage |
 | Device can record video footage to microSD card |
 | Device is accessible and configurable via USB |
 | Device is compliant with IEE802.16e-2005 WiMAX Wave 2 |
 | Device support both 3G and 4G connectivity |
 | Device support both LTE M1 and NB IoT connectivity |
 | Device takes appropriate action if it cannot ping specific IP address |
 | Device video resolution can be changed |
 | Digital Input/Output for remote monitoring and control |
 | Download the RMS app on iOS/Android for easy monitoring while on the move |
 | Driving behaviour monitoring by GNSS or accelerometer data |
 | Dual SIM – significantly reduce roaming costs |
 | Dynamic DNS - use static hostname instead of a dynamic IP addresses |
 | Easily get basic parameters such as mileage, fuel level, etc. |
 | Easily get basic parameters such as mileage, fuel level, etc. |
 | Easy configuration with dedicated mobile application via NFC |
 | Easy to install |
 | Easy to use |
 | Easy to use, secure and feature rich OpenWrt based Operating System |
 | Eco driving score |
 | Enclosure which keeps device outside safely |
 | Enclosure which lets keep device outside safely. To keep device in safe temperature range heater and cooler is used |
 | Enhanced processor |
 | Ethernet interface |
 | External antenna used for Iridium connectivity |
 | External GNSS antenna extends mounting options |
 | External SIM slot let’s you insert or change SIM card with relative ease, and the device will connect to the network right away without any need of reboot |
 | External voltage range |
 | Find your vehicle‘s location on your smartphone |
 | Firmware and configuration update |
 | Flexible system |
 | Free Android App enables handy RMS access on the move |
 | Fuel monitoring via LLS sensor gives ability to monitor highly accurate fuel level and temperature. |
 | Gigabit Ethernet with speeds up to 1000 Mbps |
 | GNSS positioning with geofencing functionality |
 | Grouping devices by companies |
 | History of actions with devices |
 | Ignition detection (sleep mode) |
 | Improve overall performance and efficiency of all devices in your fleet |
 | Impulse inputs for fuel flow meters data reading |
 | It is a broadband wireless data communications technology based around the IEE 802.16 standard providing high speed data over a wide area |
 | Limited protection against dust ingress. Protected against splash water from any direction |
 | Long battery life time, up to 5 years |
 | Long transmission range, up to 500 meters (open field) |
 | LTE Cat 1 for M2M/IoT communications |
 | LTE Cat 4 with speeds up to 150 Mbps |
 | Man-down feature. Used to detect fall down event |
 | Multiple device configuration/updates |
 | Multiple devices support |
 | Multiple secure VPN services |
 | Negative input will allow easier installation of accessories |
 | OpenLinux based OS allows high software customisation |
 | Outdoor antenna works in any weather conditions, IP67 |
 | Passive PoE support |
 | Plug and play installation - simply plug in the device and start tracking |
 | Power over Ethernet port (not compliant with IEEE 802.3af-2003) |
 | Quad core ARM Cortex A7 CPU, 717 MHz |
 | Real time notifications. Unified across platforms |
 | Reliable 4G connection with fallback to 3G network |
 | Remote door lock control |
 | Remote tachograph data download |
 | Reports to handle your fleet efficiently (Driven distance, Trip stops, Fuel tank, work time, etc.) |
 | Review your vehicle‘s trip history |
 | RS232 is an industrial standard for serial communication |
 | RS232/RS485 serial communication interfaces |
 | RS485 - industrial differential serial communication |
 | RUT850 can be used either in light vehicles or buses, trucks and other heavy transport, which utilizes 24V battery |
 | Schedules for automatic tacho data download |
 | Self install, no CD required |
 | Simplified maintenance and diagnostics |
 | Software development kit. Development tool that allows the creation of own applications instead of basic firmware functionality |
 | Support LTE Cat 6 up to 300 Mbps |
 | Tag based virtual LAN network support |
 | Teltonika Remote Management System compatible |
 | Tool tips with parameters descriptions |
 | Transfer data to server via Iridium satellite network |
 | Two - way voice communication |
 | Unified across platforms |
 | Vibration resistant FAKRA connectors |
 | Wave-2 802.11ac Dual Band WiFi with speeds up to 867Mbits/s |
 | Wide range of power supply voltages |
 | Wide range of power supply voltages for simpler integration |
 | WiMAX antenna is mounted in the device's hardware enclosure |
 | WiMAX technology standard |
 | WiMAX Wave 2 standard |
 | Wireless Access Point with Hotspot functionality |
 | Worldwide 3G network coverage |
 | Your routers will not be dependent on having a public IP address for remote access, decreasing maintenance costs and increasing effectiveness |