tsw101

TSW101

AUTOMOTIVE POE+ SWITCH

AUTOMOTIVE SWITCH

Ideal for in-vehicle solutions

POE+

4 x PoE+ ports with 802.3af and 802.3at support

Gigabit Ethernet

5 x Gigabit Ethernet ports with speeds of up to 1000 Mbps

INDUSTRIAL DESIGN

Rugged aluminum housing

LOW INPUT VOLTAGE

9-30 V power range for PoE

PLUG-N-PLAY

No configuration needed

Знакомство с наименованием товара TSW101

// TSW101 is Teltonika Networks’ first automotive-dedicated unmanaged switch.

// Equipped with five Gigabit Ethernet ports, four of which support IEEE802.3af and IEEE802.3at PoE+ standards.

// A wide range of supported power supply voltages (9-30 VDC), and a compact size allow it to slot into many automotive applications.

// Classified as a power source equipment (PSE), this device enables power supply centralization - providing up to 30 watts per single port and maximum output power of 60 watts.

// 10/100/1000 Mbps Ethernet ports for streamlined, high-bandwidth solutions.

// Ideal for providing both: in-vehicle power and an Ethernet data connection simultaneously.

3D Model

3D poster
нажмите, чтобы загрузить 3D-модель
INTERFACES
Ethernet5 x RJ45 ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
POE
PoE portsPort 1- 4
PoE standards802.3af and 802.3at
PoE Max Power per Port (at PSE)30 W
Total PoE Power Budget (at PSE)60 W
Maximum Ethernet cable length100 m
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking)10 Gbps
Packet buffer128 KB
MAC address table size2K entries
Jumbo frame support9216 bytes
POWER
Connector2-pin industrial DC power socket
Input voltage range9-30 VDC
Input voltage range for PoE9-30 VDC
Power consumptionIdle: 0.64 W / Max: 2.31 W / PoE Max: 60 W
PHYSICAL INTERFACES (PORTS, LEDS)
Ethernet5 x RJ45 ports, 10/100/1000 Mbps
Status LED’s1 x Power LED, 10 x LAN status LED’s
Power1 x 2-pin industrial DC power socket
Ground1 x Grounding screw
PHYSICAL SPECIFICATION
Casing materialAluminum housing
Dimensions (W x H x D)115 x 32 x 95 mm
Weight354 g
MountingDIN rail or wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature-40 °C to +75 °C
Operating humidity10 % to 90 % non condensing
Ingress Protection RatingIP30
CERTIFICATION & APPROVALS
RegulatoryCE, REACH, RoHS, WEEE
TSW101 CE
TSW101 UKCA
TSW101 FCC
TSW101 IC
TSW101 CB
TSW101 RCM
E-Mark
SAFETY
StandardsEN IEC 62368-1:2020+A11:2020