rutx08

RUTX08

PRAMONINIS ETERNETO MARŠRUTIZATORIUS

Gigabitinis Eternetas

4 Gigabitiniai Eterneto lizdai, palaikantys iki 128 prievadais ar žymomis pajungtų VLAN

ĮVESTIES/IŠVESTIES JUNGTYS IR USB

Skaitmeninės įvesties/išvesties jungtys nuotoliniam stebėjimui ir valdymui bei USB 2.0 jungtis

9-50 V

Šis maršrutizatorius palaiko platų maitinimo įtampų diapazoną įvairiems integravimo scenarijams

PROTOKOLAI

Daugybė palaikomų protokolų, įskaitant MQTT, Modbus TCP, BGP, GRE

SAUGUMAS

Ugniasienė bei daugybė VPN paslaugų, įskaitant OpenVPN, Ipsec, PPTP, L2TP ir DMVPN

RMS

Suderinamas su Teltonika Networks nuotoline valdymo sistema

Susipažinkite su RUTX08

// RUTX08 yra patvarus ir galingas Ethernet-to-Ethernet pramoninis VPN maršrutizatorius su pažangia OpenWrt pagrindu sukurta RutOS operacine sistema.

// Jis aprūpintas keturiomis Gigabitinio Eterneto sąsajomis ir gali pasiekti greitį iki 1000 Mbps.

// Dėl tvirto aliuminio korpuso bei įvairių pramoninių kompiuterinių tinklų protokolų palaikymo tai puikus pasirinkimas profesionaliems sprendimams.

// Dėl šių įspūdingų specifikacijų bei RutOS programinės įrangos su keliomis VPN paslaugomis, pažangia ugniasiene ir nuotolinio valdymo sistemos (RMS) palaikymo, RUTX08 puikiai tinka pramoniniams sprendimams, kur mobilusis ar WiFi ryšys nėra būtinas.

Žiūrėti video RUTX08 Wiki

3D Model

3D poster
paspauskite 3D modelio įkėlimui
Features icon Features
Downloads icon Downloads
Ordering icon Ordering
Support icon Support
ETHERNET
WAN1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
NETWORK
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake on LAN (WOL), DLNA
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoringPing Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forwards, traffic rules, custom rules
DHCPStatic and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port
DDNSSupported >25 service providers, others can be configured manually
Network backupVRRP
HotspotInternal/external Radius server, captive portal, built in customizable landing page
SSHFSPossibility to mount remote file system via SSH protocol
SECURITY
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANPort and tag based VLAN separation
WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsecIKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3 support
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPNMethod of building scalable IPsec VPNs
SSTPSSTP client instance support
ZeroTierZeroTier VPN client support
WireGuardWireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
ID filteringRespond to one ID in range [1;255] or any
Allow remote accessAllow access through WAN
Custom registersMODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GATEWAY
GatewayAllows sending commands and receiving data from MODBUS Master through the MQTT broker
DNP3
Supported modesTCP Master, DNP3 Outstation
DATA TO SERVER
ProtocolsHTTP(S), MQTT, Azure MQTT, Kinesis
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
JSON-RPCManagement API over HTTP/HTTPS
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPUQuad-core ARM Cortex A7, 717 MHz
RAM256 MB, DDR3
FLASH storage256 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices at once
Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided
USB
Data rateUSB 2.0
ApplicationsSamba share, USB-to-serial
External devicesPossibility to connect external HDD, flash drive, additional modem, printer
Storage formatsFAT, FAT32, NTFS
INPUT/OUTPUT
Input1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
EventsEmail, RMS
I/O jugglerAllows to set certain I/O conditions to initiate event
POWER
Connector4 pin industrial DC power socket
Input voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protection
PoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af, 802.3at and 802.3bt standards
Power consumption6 W Max
PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)
Ethernet4 x RJ45 ports, 10/100/1000 Mbps
I/Os1 x Digital Input, 1 x Digital Output on 4 pin power connector
Status LEDs8 x LAN status LEDs, 1 x Power LED
Power1 x 4 pin DC connector
USB1 x USB A port for external devices
ResetReboot/User default reset/Factory reset button
Other1 x Grounding screw
PHYSICAL SPECIFICATION
Casing materialAluminium housing with DIN tail mounting option
Dimensions (W x H x D)115 x 32.2 x 95.2 mm
Weight345 g
Mounting optionsDIN rail, flat surface placement
OPERATING ENVIRONMENT
Operating temperature-40 C to 75 C
Operating humidity10 % to 90 % non-condensing
Ingress Protection RatingIP30
REGULATORY & TYPE APPROVALS
Regulatory & Type ApprovalsCE, RoHS, REACH
EMI IMMUNITY
StandardsEN 55032:2015, EN 55035:2017
ESDEN 61000-4-2:2009
RSEN 61000-4-3:2006+A1:2008+A2:2010
EFTEN 61000-4-4:2012
Surge protectionEN 61000-4-5:2014
CSEN 61000-4-6:2014
DIPEN 61000-4-11:2004
SAFETY
StandardsIEC 62368-1:2014 EN 62368-1:2014+A11:2017
Visos savybės Mažiau savybių
RMS app
RMS
Nuotolinio
Valdymo
Sistema
suderinamas su RUTX08
Valdymas
Pranešimai
Konfigūravimas
Prieiga
FOTA
RUTX08
Greitas pradžios gidas

Susiję produktai

3D model