TRB255
TRB255, bir dizi Giriş / Çıkış, Seri, Ethernet bağlantı noktası ve LPWAN modem ile donatılmış bir endüstriyel Ağ Geçididir. EGPRS (2G) ağına geriye dönük uyumluluk sayesinde, eski endüstriyel cihazlar uzun süreli kullanım için yükseltilebilir ve LTE Cat M1 ve NB -IoT desteği uzun ömür sağlar. Tüm özelliklerin sayısı, bu Ağ Geçidinin eski ve modern endüstriyel ekipmanların tek bir sisteme entegre edilmesi gereken uygulamalarda mükemmel olmasını sağlar. Viki sayfasında daha fazla bilgi edinin
LTE Cat M1 / NB-IoT / EGPRS Communication
Configurable Inputs/Outputs for remote monitoring and control
GNSS positioning with geofencing functionality
RS232/RS485 serial communication interfaces
Teltonika Remote Management System compatible
Dual SIM ensures internet connectivity if single operator network stops working
LTE Cat M1 / NB-IoT / EGPRS Communication
Configurable Inputs/Outputs for remote monitoring and control
GNSS positioning with geofencing functionality
RS232/RS485 serial communication interfaces
Teltonika Remote Management System compatible
Dual SIM ensures internet connectivity if single operator network stops working
Açıklama
Özellikleri
İNDİRME
SiparişAçıklama
Endüstriyel Ağ Geçidi TRB255, LPWAN modem, GNSS alıcısı, Ethernet portu, dayanıklı 16 pinli konnektör bloğu ile donatılmıştır. Bu Ağ Geçidi kartı, tüm temel özellikleri tek bir pakette bir araya getirir: güvenli güç konektörü, G / Ç bağlantı noktaları, seri iletişim, uzun yaşam döngüsü seçeneğinin zorunlu olduğu endüstri uygulamaları için hızlı ve güvenilir internet bağlantısı. TRB255, modern ve eski endüstriyel ekipmanı tek bir çözüme entegre etmek için kullanılabilir ve LTE Cat M1, NB -IoT, SMS kontrolü, Güvenlik duvarı, açık VPN, IPSec, RMS kullanıcısı gibi çok çeşitli donanım ve yazılım özellikleriyle sağlanabilir. verilere güvenli ve ödün vermeden ulaşılabilir. EGPRS (2G) networks ile bu geriye dönük uyumluluk olmadan, zaten çalışan cihazların yükseltilmesine izin verir ve 2G ağ kapatıldıktan sonra ekipmanınıza LTE Cat M1, NB -IoT desteği ile erişilebilir olmasını sağlar.
Özellikleri
| MOBILE | |
| Mobile module | LTE (Cat M1) / NB-IoT / EGPRS |
| SIM switch | 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection fail |
| Status | Signal strength, Connected band, SINR, RSRP, RSRQ, Bytes sent/received |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS (planned), SMS to EMAIL (planned), SMS to HTTP (planned), SMS to SMS (planned), scheduled SMS (planned), SMS autoreply (planned) |
| Black/White list (planned) | Operator black/white list |
| Multiple PDN (planned) | Possibility to use different PDNs for multiple network access and services |
| Band management | Used band status display, Band lock (planned) |
| APN | Auto APN |
| ETHERNET | |
| LAN | 1 x LAN port 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| NETWORK | |
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) (planned) |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPP (planned), UPNP (planned), SSH, DHCP, Telnet, MQTT (planned), Wake On Lan (WOL) (planned) |
| VoIP passthrough support (planned) | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
| Connection monitoring | Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules |
| DHCP | Static and dynamic IP allocation, DHCP Relay |
| QoS (planned) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS (planned) | Supported >25 service providers, others can be configured manually |
| SSHFS (planned) | Possibility to mount remote file system via SSH protocol |
| SECURITY | |
| Authentication | Pre-shared key, digital certificates, X.509 certificates |
| Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
| Attack prevention (planned) | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN (planned) | Tag based VLAN separation |
| Mobile quota control | Custom data limits for both SIM cards |
| WEB filter (planned) | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
| Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
| VPN | |
| OpenVPN | Multiple clients and server can be running simultaneously, 12 encryption methods |
| OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
| IPSec | IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
| PPTP, L2TP | Client/Server services can run simultaneously |
| DMVPN (planned) | Method of building scalable IPsec VPNs |
| GRE (planned) | GRE tunnel |
| SERIAL COMMMUNICATION MODES | |
| Modes | Console, OverIP, Modem (planned), Modbus RTU master, Modbus gateway, NTRIP client (planned) |
| MODBUS | |
| MODBUS TCP SLAVE | |
| ID filtering | Respond to one ID in range [1;255] or any |
| Allow remote access | Allow access through WAN |
| Custom registers | Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality |
| MODBUS TCP MASTER | |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
| MODBUS RTU MASTER | |
| Supported baud rates | From 300 to 3000000 |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
| Number of data bits | 7 or 8 |
| Number of stop bits | 1 or 2 |
| Parity bits | None, Even, Odd |
| Flow control | None, RTS/CTS (only for RS232 interface), Xon/Xoff |
| MQTT GATEWAY | |
| Gateway | Allows sending commands and receiving data from Modbus Master trough MQTT broker |
| MODBUS DATA TO SERVER | |
| Protocols | HTTP(S), MQTT, Azure MQTT (planned) |
| MONITORING & MANAGEMENT | |
| WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
| FOTA | Firmware update from server, automatic notification |
| SSH | SSH (v1, v2) |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
| Call (planned) | Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer |
| TR-069 (planned) | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
| MQTT (planned) | MQTT Broker, MQTT publisher |
| SNMP (planned) | SNMP (v1, v2, v3), SNMP Trap |
| JSON-RPC | Management API over HTTP/HTTPS |
| Modbus | Modbus TCP status/control |
| RMS | Teltonika Remote Management Systems (RMS) |
| IoT PLATFORMS | |
| Cloud of Things (planned) | Allows monitoring of: Device data, Mobile data, Network info, Availability |
| ThingWorx (planned) | Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
| Cumulocity (planned) | Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
| Azure IoT Hub (planned) | Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
| SYSTEM CHARACTERISTICS | |
| CPU | Qualcomm QCA9531, MIPS 24kc, 650 MHz |
| RAM | 64 MB, DDR2 |
| Flash memory | 16MB SPI Flash (4 MB available for user) |
| FIRMWARE / CONFIGURATION | |
| WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup, restore point |
| FOTA | Update FW/configuration from server |
| RMS | Update FW/configuration for multiple devices |
| Keep settings | Update FW without losing current configuration |
| FIRMWARE CUSTOMIZATION | |
| Operating system | RutOS (OpenWrt based Linux OS) |
| Supported languages | Busybox shell, Lua, C, C++ |
| Development tools | SDK package with build environment provided |
| LOCATION TRACKING | |
| GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
| Coordinates (planned) | GNSS coordinates via WebUI, SMS, TAVL, RMS |
| NMEA | NMEA 0183 |
| NTRIP (planned) | NTRIP protocol (Networked Transport of RTCM via Internet Protocol) |
| Server software (planned) | Supported server software TAVL, RMS |
| Mobile Network Geolocating | Location without using GPS, get approximate location based on mobile tower on RMS |
| Geofencing (planned) | Configurable multiple geofence zones |
| INPUT/OUTPUT | |
| Configurable I/O | 3 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA |
| Analog input | 1 x Analog input (0 - 30 V) |
| Events (planned) | SMS, Email |
| Output control | HTTP POST/GET, Schedule |
| I/O juggler (planned) | Allows to set certain I/O conditions to initiate event |
| SERIAL | |
| RS232 | Terminal block connector: TX, RX, RTS, CTS |
| RS485 | Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface) |
| Supported baud rates | From 300 to 3000000 |
| Number of data bits | 7 or 8 |
| Number of stop bits | 1 or 2 |
| Parity | None, Even, Odd |
| Flow control | None, RTS/CTS (only for RS232 interface), Xon/Xoff |
| POWER | |
| Connector | 2 pins in 16 pin industrial terminal block |
| Input voltage range | 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max |
| Power consumption | Idle: <1.2 W, Max: <5 W |
| PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTON, SIM) | |
| Ethernet | 1 x RJ45 port, 10/100 Mbps |
| I/O’s | 3 x Configurable I/O, 1 x Analog input in 16 pin terminal block |
| Status LEDs | 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED |
| SIM | 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray |
| Power | 2 pins in 16 pin terminal block |
| Antennas | 1 x SMA connector for Mobile, 1 x SMA connector for GNSS |
| RS232 | 4 pins in 16 pin terminal block (TX, RX, RTS, CTS) |
| RS485 | 4 pins in 16 pin terminal block (D+, D-, R+, R-) |
| Reset | Reboot, restore to user default (planned), restore to factory defaults |
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminium housing with DIN rail mounting option |
| Dimensions | 83 x 25 x 74 mm |
| Weight | 165 g |
| Mounting options | DIN rail, wall mounting (additional kits needed), flat surface placement |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 ℃ to 75 ℃ |
| Operating humidity | 10% to 90% non-condensing |
İNDİRME
Sipariş
Nereden Alınır
filtre
Video
Ürünü ve özelliklerini tanımlayan videolar.
İlgili aksesuarlar
Bu cihazla uyumlu aksesuarların listesi
COMBO MIMO Mobil ÇATI SMA Anteni
COMBO SISO Mobil / GNSS / WiFi ÇATI SMA Anteni
COMBO MIMO Mobil / GNSS / WIFI ÇATI SMA Anteni
Mobil SMA Anteni
Kompakt Mobil Anten
Straight Compact Mobile Antenna
Mobil manyetik SMA Anteni
Mobil yapışkan sma anteni
GNSS Yapıştırıcı SMA Anteni
DIN Ray Kiti
Kompakt DIN Ray Kiti
Yüzey Montaj Kiti
Ethernet kablosu 1.5m
