3D MODEL
ETH
4 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
IEEE 802.3 series standards
802.3i, 802.3u, 802.3ab, 802.3x, 802.3az
Bandwidth (Non-blocking)
8 Gbps
Packer buffer
128 KB
MAC address table size
2K entries
Jumbo frame support
9216 bytes
Connector
2-pin industrial DC power socket
Input voltage range
7 - 57 VDC; 9 - 40 VAC
PoE (passive)
Possibility to power up through ETH1 ports, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
Power consumption
Idle: 0.26 W / Max: 1.44 W
Ethernet
4 x RJ45 ports, 10/100/1000 Mbps
Status LEDs
8 x ETH status LEDs, 1 x Power LED
Power
1 x 2-pin industrial DC power socket
Other
1 x Grounding screw
Casing material
Aluminium housing
Dimensions (W x H x D)
102 x 25 x 81.5 mm
Weight
210 g
Mounting options
Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)
Operating temperature
-40 °C to 75 °C
Operating humidity
5% to 95% non-condensing
Ingress Protection Rating
IP30
Regulatory
CE, REACH, RoHS, WEEE, UKCA, FCC, IC, CB, RCM
Standards
EN IEC 62368-1:2020+A11:2020
IEC 60068-2-6:2007 Environmental testing - Part 2-6
IEC 60068-2-27:2008 Environmental testing - Part 2-27
IEC 60068-2-31:2008 Environmental testing - Part 2-31
WIKI knowledge
base
In our extensive Wiki knowledge base you can find everything from the latest firmware, usage scenarios and changelogs to certificates and first start guides.
In our extensive Wiki knowledge base you can find everything from the latest firmware, usage scenarios and changelogs to certificates and first start guides.