rut300

RUT300

ENDÜSTRİYEL ETHERNET YÖNLENDİRİCİ

ARAYÜZLER

5 x Hızlı Ethernet portu (10/100 Mbps). 2 x Yapılandırılabilir dijital Giriş / Çıkış ve USB 2.0

DAYANIKLILIK

Zorlu ortamlara dayanabilen alüminyum gövde

GÜVENLİK DUVARI

CLI aracılığıyla sınırsız güvenlik duvarı yapılandırması; DMZ; NAT; NAT-T

VPN

OpenVPN, IPsec, PPTP, L2TP & DMVPN, L2TP, DMVPN, Stunnel dahil olmak üzere çok sayıda VPN servisi

VLAN

VLAN etiketleme ve bağlantı noktası tabanlı VLAN'lar için 4096 adede kadar VLAN kimliğini destekler

RMS

Teltonika Uzaktan Yönetim Sistemi ile uyumlu

İle tanışın RUT300

// RUT300, zorlu endüstriyel ağ görevlerinin yanı sıra genel ağ uygulamaları için de mükemmel, küçük ama güçlü bir Ethernet yönlendiricidir.

// Beş Ethernet portu, iki yapılandırılabilir dijital Giriş / Çıkış ve çeşitli ekipmanlarıı internete kolayca bağlamak için bir USB bağlantı noktası.

// Anında güvenlik ve çok sayıda VPN için önceden yapılandırılmış Güvenlik Duvarı.

// Pasif PoE (Pasif ethernet üzerinden güçlendirme), kurulum karmaşasını azaltmaya yardımcı olur.

// RutOS ve Uzaktan Yönetim Sisteminin (RMS) tüm avantajlarıyla birlikte gelen ekonomik ve zengin özelliklere sahip bir endüstriyel cihaz.

3D Model

3D poster
3D Model yüklemek için tıklayın
ETHERNET
WAN1 x WAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
LAN4 x LAN ports (can be configured as secondary WAN ports), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
NETWORK
RoutingStatic routes, Dynamic routes
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoringPing Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forwards, traffic rules, NAT rules, custom rules
DHCPStatic and dynamic IP allocation, DHCP Relay
QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNSSupported >25 service providers, others can be configured manually
Network backupWired WAN options, each of which can be used as an automatic Failover
Load balancingBalance Internet traffic over multiple WAN connections
SSHFSPossibility to mount remote file system via SSH protocol
SECURITY
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANPort and tag based VLAN separation
WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPSecIKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3 support
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPNMethod of building scalable IPsec VPNs
SSTPSSTP client instance support
ZeroTierZeroTier VPN client support
WireGuardWireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
ID filteringRespond to one ID in range [1;255] or any
Allow remote accessAllow access through WAN
Custom registersMODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GATEWAY
GatewayAllows sending commands and receiving data from MODBUS Master trough MQTT broker
DNP3
Supported modesTCP Master, DNP3 Outstation
DATA TO SERVER
ProtocolsHTTP(S), MQTT, Azure MQTT, Kinesis
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
JSON-RPCManagement API over HTTP/HTTPS
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPUQCA9531, MIPS 24kc, 650 MHz
RAM64 MB, DDR2
FLASH storage16 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices at once
Keep settingsUpdate FW without losing current configuration
USB
Data rateUSB 2.0
ApplicationsSamba share, USB-to-serial
External devicesPossibility to connect external HDD, flash drive, printer
Storage formatsFAT, FAT32, NTFS
INPUT/OUTPUT
Configurable I/O2 x Configurable digital Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA
EventsEmail, RMS
I/O jugglerAllows to set certain I/O conditions to initiate event
POWER
Connector4 pin industrial DC power socket
Input voltage range7 - 30 VDC, reverse polarity protection, voltage surge/transient protection
PoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
Power consumptionIdle: 1.3 W, Max: 3 W
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet5 x RJ45 ports, 10/100 Mbps
I/Os2 x Configurable digital Inputs/Outputs on 4 pin power connector
Status LEDs5 x ETH status, 1 x Power
Power1 x 4 pin DC connector
USB1 x USB A port for external devices
ResetReboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
Casing materialAluminium housing with DIN rail mounting option
Dimensions (W x H x D)100 x 30 x 85 mm
Weight229 g
Mounting optionsDIN rail, flat surface placement
OPERATING ENVIRONMENT
Operating temperature-40 C to 75 C
Operating humidity10 % to 90 % non-condensing
RUT300
Hızlı başlangıç rehberi