Live Q&A: The New Era of 5G


Questions & Answers

What about certification in different countries? What certificates are planned in the future?
Do your routers have EAL4/EAL4+ security certifications?
Has there been any benchmark testing done against consumer-grade products (Netgear NightHawk)?
What is the maximum throughput R&D received in the lab on these devices?

Do the devices are ready for deployment in Australia (Telstra, Optus, and Vodafone AU) and have Network Operator and ACMA approval?

Will the RUTX50 get the automotive certification?
When the RUTX50 be available?
When will your 5G routers be available for purchase from your distributors?
When there will be a version for the USA?
Can we consider TRB500 as a 5G version of TRB140?
So, the RUTX50 is a RUTX12 but with 5G? Same memory size?
Can you please comment on how our 5G devices and their powerful modules could attract our existing Telecom operating partners (Vodafone, A1 Telekom) or the prospective ones?
Is Bluetooth available on the RUTX50?
Does the RUTX50 support WIFI5 or WIFI6?
Does the RUTX50 uses the same SOC as the RUTX11?
Will RUTX50 support passive PoE?
Is the RUTX50 have a dual modem?
Is the RUTX50 can be used for load balancing or bonding?
Does the RUTX50 consume less than the RUT955 router?
Is the CPU the same in TRB500 and RUTX50?
Is it possible to extend RAM at least to 512MB or even better to 1024MB to use bonding services?
As it is 5G, what about IPv6 support or dual stack support for SIM connection?
Have we increased RAM/Flash this time for better operation?
Will the 5Gbps ethernet be compatible with my 1Gbps network infrastructure?
What chipset is used? TRB 500 is IP30, will the performance hamper if the device is placed inside an IP67 or IP68 case?
Is the encryption speed of the RUTX50 similar to the RUTX11's one when using IPSEC or Wireguard
Please clarify the antenna arrangement for RUTX50: 2xMIMO or 4xMIMO or SISO?
I would like to ask how it is with antennas. Is an outdoor one required for 5G?
What will be my limitations if I have to use the RUTX50 with a 2x2 antenna? Can I turn off two antenna connectors? Should I use coax terminators for the unused connectors?
Is it possible to separate the two Wi-Fi antennas with an extension cable to increase the coverage? Or have the two antennas be near to each other to work?
Are there any plans to power Teltonika devices with active PoE (Teltonika PoE Switches)?
Will there be other TRB5... with Inputs and Outputs?
Will there be any future support for 5G ATSSS (Access Traffic Steering, Switching & Splitting) please?
Why have you chosen passive PoE (and only 1 port) instead of the active one that complies with standards? Is it mainly to reduce the cost of the device?
Contact us